OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21CC

Reductant Control Module Supply Voltage High

P21CC is the overvoltage counterpart of P21CB: the DEF control module sees a supply above what its electronics are designed for. Ford's 2023 diesel summary checks the reductant pump controller in a continuous loop and sets P21CC once its supply exceeds 19 V, deciding within 5 s. On a 12 V vehicle such values usually come from a charging system whose regulator has failed, from a jump start with a 24 V source, or from load dumps on a loose battery terminal; less often the module measures its own input wrongly. To protect pump and heaters the module usually stops working, so dosing pauses. GM's published diesel tables list only the low case. P21CA is the general supply code, and P0563 shows whether the engine module sees the same excess.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / CC

Possible causes

  • Alternator voltage regulator overcharging high
  • Jump start or charging with excessive voltage medium
  • Loose battery terminal causing voltage spikes medium
  • Module's own voltage measurement faulty low

Symptoms

  • Check engine light on
  • DEF dosing paused, SCR warning
  • Battery or charging warning, bulbs unusually bright

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P21CC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication