OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21C8

Reductant Control Module Power Relay/Relays Control Circuit Low

P21C8 means the control line of the DEF module's power relay, or relays, sits too close to ground. No manufacturer documents P21C8 publicly. Ford's 2023 diesel summary only shows the open-circuit sibling P21C7, judged by comparing the commanded relay state with the voltage on the switched side; a low-side code follows the same idea with a pin voltage below the expected window. What a short to ground does depends on the driver: if the module switches the coil on its ground side, the relay may stay energised and drain the battery after switch-off; if it switches the supply side, the relay never pulls in and the SCR system loses power. The engine module pair P0685/P0686 is the closest analogy. P21C9 is the high-side fault.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / C8

Possible causes

  • Control wire chafed and shorted to ground high
  • Shorted relay coil medium
  • Moisture in relay socket or module connector medium
  • Output stage in the controlling module faulty low

Symptoms

  • Check engine light on
  • DEF system without power or permanently powered
  • Flat battery after the vehicle has been parked

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21C8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication