P21C6
Reductant Level Sensor B Stuck
P21C6 applies only to DEF tanks with a second level measurement, labelled B. It is stored when that second reading is electrically fine but stays frozen at one value although the module expects it to change. No manufacturer documents P21C6 publicly. GM's 2025 diesel tables show how such a check works for sensor 1 (P21C5): during driving with noticeable acceleration and liquid fluid, a level change of less than 0.3 mm per second over roughly 200 s is judged as stuck. Older GM tanks with three discrete level contacts would equate B with contact 2, but GM covers that one only with circuit codes P21AA and P21AB. CARB demands rationality checks for such inputs. Wiring faults of sensor B are P21A8 to P21AC; an untrustworthy level can trigger DEF warnings.
Possible causes
- Second level sensing element in the tank unit faulty high
- Float or contact held by crystals or debris medium
- Calibration of the level evaluation needs a software update low
Symptoms
- Check engine light on
- DEF gauge implausible or not moving
- DEF warning in the instrument cluster
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P21C6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.