OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21C3

Reductant Heater Relay Control Circuit Low

P21C3 is the low-side fault on the control line of the DEF heater relay: the signal is pulled toward ground, for example by a chafed wire touching the frame or a shorted relay coil, so the relay no longer follows the command. Ford's 2023 diesel summary uses the same continuous check as for P21C2, but here the relay stage is on, every heater has been told to stay off, and still more than 6 A of heater current is measured; the fault is confirmed within 5 s. Such a reading means power reaches the heater circuit by a path the module never requested. Whether the heaters then stay dead or run without control depends on how the relay is wired. P21C2 is the open-circuit counterpart, P21C4 the high-side fault, P21C7 the module power relay.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / C3

Possible causes

  • Control wire chafed through and shorted to ground high
  • Relay coil with internal short or welded contacts medium
  • Water or salt in the relay or heater connector medium
  • Output stage of the controlling module faulty low

Symptoms

  • Check engine light on
  • DEF heating inactive or running when not commanded
  • Blown fuse in the heater supply

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21C3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication