OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21C0

Cold Start Cylinder 11 Injection Timing

P21C0 applies only to twelve-cylinder engines (V12 or W12), since passenger-car engines with exactly eleven cylinders do not exist. Examples with direct injection are BMW's N74 twin-turbo V12, found in the BMW 760i and in Rolls-Royce models such as Ghost, Wraith and Dawn, and the 6.3-litre W12 FSI. The code would report that cylinder 11 missed its cold-start injection timing, for instance when the extra injection for catalyst heating is shifted. Whether BMW, Rolls-Royce or Audi use P21C0 is not documented publicly. The legal basis is CARB's demand for separate cold-start diagnostics, allowing the module to tell such faults apart from warm-running timing faults (P021E). Related: P0211 (injector circuit), P0311 (misfire).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / C0

Possible causes

  • Direct injector of cylinder 11 with changed opening behaviour high
  • Heat-damaged wiring or connector at injector 11 medium
  • Injector driver for cylinder 11 in the engine control module faulty low

Symptoms

  • Check engine light after cold starts
  • Barely noticeable on the road; a twelve-cylinder engine masks a single cylinder well

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P21C0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication