P21BF
Cold Start Cylinder 10 Injection Timing
Cylinder 10 is the last cylinder of a V10 and exists otherwise only on twelve-cylinder engines. V10 engines are rare: Ford's 6.8-litre truck V10 (firing order 1-6-5-10-2-7-3-8-4-9, in the E-Series until 2019) and the 5.2-litre direct-injection V10 of Lamborghini and Audi. P21BF states that cylinder 10, during the cold-start heating phase, received its fuel at a different moment than targeted. No manufacturer documents the code publicly; the description rests on CARB's cold-start monitoring rules and on the system code P05EC, which GM checks across all cylinders of its diesels. If P021D (warm timing) or P0210 (injector circuit) are stored too, the cylinder 10 injector is the prime suspect; a cold-start pulse code does not exist for this cylinder.
Possible causes
- Injector of cylinder 10 aged or contaminated high
- Wiring or connector problem at injector 10 medium
- Engine module software needing a cold-start calibration update low
Symptoms
- Check engine light after one or more cold starts
- Uneven idle until the engine warms up
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P21BF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.