OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21BE

Cold Start Cylinder 9 Injection Timing

A ninth cylinder exists only on V10, V12 and W12 engines, so P21BE is limited to a handful of models. Petrol engines in this class with direct injection include the 5.2-litre V10 of Lamborghini and Audi (Huracán, R8, S6 and S8) and the 6.3-litre W12 FSI of the Audi A8, which feeds its injectors from two high-pressure pumps and two rails. Whether their engine modules use P21BE is not documented publicly, and no other manufacturer source names the code. Its meaning follows from the series: during the cold-start heating phase the injection timing of cylinder 9 deviated from its target, a fault CARB wants reported apart from warm-engine faults. There is no cold-start injection pulse code beyond cylinder 8. Related: P021C (warm), P0209, P0309.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / BE

Possible causes

  • Direct injector of cylinder 9 with deposits or slow response high
  • Low pressure on the rail feeding cylinder 9 (engines with two rails) low
  • Wiring or connector fault at injector 9 medium

Symptoms

  • Check engine light after cold starts
  • Slightly uneven idle while the engine is cold

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P21BE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication