P21BB
Cold Start Cylinder 6 Injection Timing
Cylinder 6 exists on six-cylinder engines and anything larger – inline sixes and V6 units such as Ford's 3.5-litre EcoBoost petrol or the 3.0-litre EcoDiesel in the Ram 1500. For that diesel FCA listed the warm-engine timing codes P020A–P020F together with the over-advanced and over-retarded codes in a 2021 bulletin whose fix was reprogramming the engine module. P21BB is the cold-start version for cylinder 6: during the heating phase after start, its injection timing did not match the target. Diesels adapt injection timing to coolant temperature after a cold start to hold emissions down before NOx sensors are working, as a GM patent describes. No manufacturer documents P21BB publicly; a software update is worth checking before replacing parts.
Possible causes
- Outdated engine module software (analogous timing codes were cured by reprogramming) medium
- Injector of cylinder 6 worn, coked or with drifting opening delay high
- Damaged wiring or connector at injector 6 medium
Symptoms
- Check engine light after cold starts
- On diesels, more white smoke or knocking in the first minutes
- Hard start or rough idle when cold
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P21BB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.