OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21BA

Cold Start Cylinder 5 Injection Timing

P21BA can only occur on engines with at least five cylinders – inline fives, V6, V8 and larger. GM's 4.3-litre V6 and 5.3/6.2-litre V8 direct-injection engines use a dual-pulse injection in open loop after a cold start; a GM bulletin explains that the module watches crankshaft speed in this mode and sets P050D (cold start rough idle) if it varies too much. A per-cylinder timing code such as P21BA goes a step further and names the cylinder whose cold-start injection timing missed its target. No manufacturer has published use of P21BA. On which bank cylinder 5 sits depends on the manufacturer's numbering, so check the engine's cylinder layout before testing. Related: P020E (warm), P2B0C (cold-start pulse), P0305.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / BA

Possible causes

  • Injector of cylinder 5 sticking or delivering late when cold high
  • Repair on the wrong injector because of a misread cylinder numbering medium
  • Open or high-resistance circuit to injector 5 medium

Symptoms

  • Check engine light after cold starts
  • Rough idle during the first seconds after a cold start, possibly together with P050D

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21BA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication