OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21B9

Cold Start Cylinder 4 Injection Timing

Four-cylinder petrol direct injection is the most widespread engine type this code can apply to, and cylinder 4 is its last cylinder. Ford's 2011 OBD summary for its first turbo direct-injection engine explains the background: during catalyst heating the injection timing may be specific to that mode, possibly as two injections with one during the compression stroke, which in turn needs a rail pressure window (checked as P053F). P21B9 reports that this cold-start timing went wrong on cylinder 4 alone. No manufacturer lists the code publicly, so the description rests on CARB's cold-start rules and the documented system codes. Warm-engine counterpart: P020D; electrical injector fault: P0204; cold-start pulse: P2B0B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / B9

Possible causes

  • Deposits on the tip of injector 4 changing its opening behaviour high
  • Harness fault on the injector 4 circuit medium
  • Rail pressure barely inside its window during cold start, affecting the last cylinder first low

Symptoms

  • Check engine light, usually without drivability complaints
  • Slightly longer catalyst warm-up and possibly higher cold-start emissions
  • Occasional hesitation right after a cold start

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21B9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication