OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21B7

Cold Start Cylinder 2 Injection Timing

P21B7 flags cylinder 2 during the cold-start phase only: the injection timing commanded for catalyst heating did not arrive as intended on that cylinder. The heating phase is brief and ends as coolant and catalyst warm up, so the monitor gets one chance per cold start and may need several cold starts before the code is confirmed. GM's 2025 diesel calibrations show the principle at system level: requested against scheduled start of injection, one sample per revolution, 88 failures out of 176 set P05EC with the lamp in the first trip. A cylinder-specific code like P21B7 appears in no public manufacturer document. If P020B (cylinder 2, warm) or P2B09 (cold-start pulse) are stored as well, the injector or its circuit is more likely than software.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / B7

Possible causes

  • Injector of cylinder 2 worn or coked, opening late at low temperature high
  • Chafed or high-resistance wiring to injector 2 medium
  • Weak battery lowering injector supply voltage during and after cranking low

Symptoms

  • Check engine light that appears only after cold starts
  • Uneven running or slight smoke shortly after starting a cold engine
  • Code may take several cold starts to return after clearing

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21B7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication