P21B1
Reductant Level Sensor C Circuit Intermittent/Erratic
P21B1 marks level sensor C signals that come and go. Public manufacturer criteria do not exist; GM's diesel tables describe sensor 3 only through the steady faults P21AF and P21B0, each filtered over 3 s. A stored P21B1 therefore suggests interruptions too short for those monitors, typical of a connector that works loose under tank vibration, fluid seeping into the terminals, or a harness pinched under a tank strap. Moving the harness while watching the sensor data with a scan tool is the quickest way to reproduce it. If P21AC is present too, the cause probably lies in wiring both sensors share. Drivers mainly notice an unsteady DEF level display or a warning that appears and clears again.
Possible causes
- Tank connector loosening under vibration high
- Fluid seeping into the terminals medium
- Harness pinched under a tank strap low
Symptoms
- Unsteady DEF level display
- DEF warning that appears and clears
- Stored code without current fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P21B1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.