OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21AE

Reductant Level Sensor C Circuit Range/Performance

P21AE stands for an implausible level sensor C signal whose voltage is still electrically valid. No manufacturer describes a separate check for this code in public material. GM shows how such plausibility testing can work: on the 2014 Cruze diesel the ECM compares the readings of all three discrete level sensors after the test pulse and flags combinations that cannot physically occur together, but files the result under P203B rather than under a code for the sensor concerned. For the 2018 Cruze, GM did assign P21A9 to sensor 2. A maker using P21AE would point to sensor C itself, for instance after urea crystal deposits or partial freezing. Electrical faults of this sensor are covered by P21AF and P21B0.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / AE

Possible causes

  • Crystallised urea on level sensor C medium
  • Partly frozen fluid around the sensor medium
  • Level sensor C drifting or degraded low

Symptoms

  • Check engine light on
  • DEF level display does not match the refill amount
  • Possible DEF warning sequence

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21AE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication