P21A8
Reductant Level Sensor B Circuit
P21A8 is the general circuit code for the second reductant level sensor, needed only where a DEF tank reports its fill level through more than one sensing element. GM's 6.6L Duramax (LML/LGH) and the 2014 Cruze diesel read three discrete level sensors, numbered 1 to 3 in GM's tables, which corresponds to A to C. GM does not use P21A8 itself but splits the fault into P21AA (below 0.17 V after a test pulse) and P21AB (open load or short to battery). A maker using the umbrella code stores it for any wiring fault it cannot assign to one side. CARB requires such input circuits to be monitored (13 CCR 1968.2 (f)(15.2.1)). Expect a DEF warning message and, if left unrepaired, the usual SCR warning sequence.
Possible causes
- Damaged or corroded harness or connector at the DEF tank high
- Level sensor B in the tank assembly failed medium
- Tank level evaluation electronics faulty low
Symptoms
- Check engine light on
- DEF system warning message in the cluster
- DEF level or range display missing or wrong
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P21A8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.