OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21A7

Cylinder 12 Air-Fuel Ratio Imbalance

P21A7 is the last code of the cylinder series that starts with P219C and points to cylinder 12 of a twelve-cylinder engine. There is no public manufacturer description and no NHTSA bulletin for it. Under CARB's rule (13 CCR 1968.2 (e)(6.2.1)(C)) the monitor had to be in all 2014 and later petrol vehicles, with limits of 3.0 times the FTP standard until 2014 and 1.5 times from 2015 for non-LEV III cars, so twelve-cylinder engines are covered as well; many simply report the bank code P219A or P219B. The causes do not differ from smaller engines: a single injector, a leaking intake seal or a valve that does not close properly. Because a V12 has two separate banks, check whether the bank code and the misfire counter P0312 agree with cylinder 12 before parts are replaced.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / A7

Possible causes

  • Cylinder 12 injector out of tolerance high
  • Intake seal leak at cylinder 12 medium
  • Valve not sealing at cylinder 12 low

Symptoms

  • Check engine light on
  • Possible P0312 or slight vibration

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21A7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication