OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21A6

Cylinder 11 Air-Fuel Ratio Imbalance

P21A6 assigns the imbalance to cylinder 11, which exists only on twelve-cylinder engines. No manufacturer has published how it detects this code, and no NHTSA bulletin names it, so it is a placeholder that J2012 provides for large engines. The legal frame is CARB's cylinder imbalance monitor (13 CCR 1968.2 (e)(6.2.1)(C)). A V12 or W12 feeds six cylinders into each front sensor, and exhaust pulses overlap, which makes a clean per-cylinder reading hard; the Cummins patent describes estimating the signal content at the engine cycle frequency and then trimming the fuel of the cylinder that causes it, an approach suited to many cylinders. In practice the work is mechanical: confirm the numbering, compare injector delivery across the bank and run a compression or leak-down test on cylinder 11.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / A6

Possible causes

  • Cylinder 11 injector clogged or leaking high
  • Valve leakage at cylinder 11 medium
  • Intake leak at cylinder 11 low

Symptoms

  • Check engine light on
  • Possible P0311 with a large deviation

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21A6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication