OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21A5

Cylinder 10 Air-Fuel Ratio Imbalance

P21A5 flags cylinder 10, which on a V10 is the final cylinder and on a V12 sits near the end of its bank. Public manufacturer material for this code does not exist, and the NHTSA bulletin index has no entry for it. CARB requires detection of any cylinder imbalance that lifts emissions above one and a half times the FTP limit (from 2015) and that the fault code point as precisely as the method allows; since a phase-in from 2019 to 2021, petrol vehicles must also log how often the check actually runs in daily use. Before chasing cylinder 10 specifically, confirm that the flagged number matches the manufacturer's numbering and that no other cylinder of the same bank also shows a misfire count or a deviating injector, because a correction on one cylinder can shift its neighbours. Then test the cylinder 10 injector and compression.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / A5

Possible causes

  • Cylinder 10 injector out of tolerance high
  • Fault in another cylinder of the same bank shifting the result medium
  • Compression loss at cylinder 10 low

Symptoms

  • Check engine light on
  • Possible P0310 or uneven idle

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21A5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication