OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21A4

Cylinder 9 Air-Fuel Ratio Imbalance

P21A4 is reserved for an imbalance at cylinder 9 and can therefore only appear on engines with ten or more cylinders, a small group of V10 and V12 petrol engines. No manufacturer documents the code publicly and no bulletin in the NHTSA index mentions it. CARB's rule (13 CCR 1968.2 (e)(6.2.1)(C)) still applies to these engines, and it allows a maker to store a bank code or even a misfire code instead when its hardware cannot single out a cylinder. With five or six cylinders feeding one front sensor, separating them needs extra effort, for example a frequency analysis tied to the engine cycle as in the Cummins patent, or an active test that changes the fuel of one cylinder at a time as VW does on its five-cylinder. Diagnosis follows the usual order: injector, intake sealing, compression of cylinder 9.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / A4

Possible causes

  • Cylinder 9 injector clogged or leaking high
  • Intake leak at cylinder 9 medium
  • Compression loss at cylinder 9 low

Symptoms

  • Check engine light on
  • Possible P0309 with a large deviation

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P21A4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication