P21A2
Cylinder 7 Air-Fuel Ratio Imbalance
P21A2 places a mixture imbalance at cylinder 7, so it only exists on engines with eight or more cylinders. No manufacturer documents this code publicly; the bulletin index of the US safety authority NHTSA contains no bulletin that names it. The requirement behind it is CARB's monitor for uneven mixture between cylinders (13 CCR 1968.2 (e)(6.2.1)(C)), which asks the code to identify the cause as far as the method allows. A V8 has four cylinders per front sensor, so the sensor signal alone separates them less clearly than on a four-cylinder; methods that work at the engine cycle frequency, as described in a Cummins patent, or VW's individual leaning test make cylinder-level codes possible. Check the cylinder 7 injector, its intake sealing and compression, and compare with misfire counts.
Possible causes
- Cylinder 7 injector clogged or leaking high
- Intake runner or injector seal leak at cylinder 7 medium
- Compression loss at cylinder 7 low
Symptoms
- Check engine light on
- Often no noticeable symptom
- Possible P0307 if the deviation is large
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P21A2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.