OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P21A1

Cylinder 6 Air-Fuel Ratio Imbalance

P21A1 marks cylinder 6, the last cylinder of an inline six or V6. The clearest example comes from the 2025 RAM 1500 with the 3.0 Hurricane twin-turbo inline six: the charge-air cooler housing had a loose crimp that let boost escape, the cylinders filled unevenly and P21A1 set together with other cylinder codes, accompanied by a whistle and lower boost; the cooler was inspected and replaced if needed. Toyota listed P219A, P219B and P219C to P21A1 for the 2015 Tacoma 1GR-FE and worked through a leak-down test to a valve job. Kia replaced high-pressure injectors and fuel lines on the 2022 Carnival 3.5 GDI, while Audi corrected a software setting on 2010 to 2012 3.0 TFSI models. A code for the last cylinder alone is no reason to suspect sensor or ECM before injector and compression are checked.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / A1

Possible causes

  • Charge-air cooler or boost leak (turbo engines, e.g. RAM 3.0 Hurricane) medium
  • Faulty injector at cylinder 6 medium
  • Valve leakage at cylinder 6 medium
  • ECM software setting (e.g. Audi 3.0 TFSI) low

Symptoms

  • Check engine light on
  • Whistling noise and reduced boost with a charge-air leak
  • Possible P0306 or rough running

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P21A1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication