OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P219F

Cylinder 4 Air-Fuel Ratio Imbalance

P219F singles out cylinder 4, the last cylinder on four-cylinder engines. Infiniti issued a bulletin for 2017 to 2018 QX60 with the direct-injection VQ35DD that stored only P219F without any driveability complaint; the remedy was ECM reprogramming followed by the idle air volume learn. Honda found the opposite case on 2023 to 2025 CR-V Hybrid and Accord Hybrid: a leaking injector made the mixture rich, fouled spark plugs and caused rattling and rough running, with P219C to P219F, P0172 and A/F sensor heater codes; all injectors and the fouled plugs were replaced and Honda warned against changing the A/F sensor first. Hyundai's 2018 Sonata 2.0 turbo also set P219F through software. Reading the spark plug of the flagged cylinder is a quick first check for rich or lean burning.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 9F

Possible causes

  • Leaking injector at cylinder 4 high
  • Oversensitive detection fixed by ECM reprogramming (e.g. Infiniti QX60, Hyundai Sonata) medium
  • Fouled spark plug as a consequence of a rich cylinder low

Symptoms

  • Check engine light on
  • Rough running or rattling noise when an injector leaks
  • No symptom when the cause is software

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P219F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication