OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P219D

Cylinder 2 Air-Fuel Ratio Imbalance

P219D singles out cylinder 2. On engines with two banks, whether cylinder 2 sits on bank 1 or bank 2 depends on the maker's numbering, which decides whether P219A or P219B may appear alongside. Bulletins show three very different outcomes. Kia replaced the high-pressure injector and its clip plus the high-pressure and crossover fuel pipes on 2022 Carnival models with the 3.5 GDI V6 when any of P219C to P21A1 had set. Hyundai fixed P219C to P219F on the 2018 Sonata 2.0 turbo with ECM and TCM software and noted that drivers feel nothing. Stellantis found a charge-air cooler with a loose crimp on the 2025 RAM 1500 3.0 Hurricane, which set P219D among other cylinder codes along with a whistling noise and reduced boost. A real cylinder 2 fault is confirmed with an injector balance test and a leak-down test.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 9D

Possible causes

  • Faulty high-pressure injector at cylinder 2 (direct injection) high
  • Charge-air leak upsetting cylinder filling (e.g. RAM 3.0 Hurricane) medium
  • Detection logic corrected by software update (e.g. Hyundai Sonata 2.0T) medium
  • Compression loss at cylinder 2 low

Symptoms

  • Check engine light on
  • Often no driveability change
  • Reduced power or whistling noise if a charge-air leak is the cause

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P219D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication