OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P219C

Cylinder 1 Air-Fuel Ratio Imbalance

P219C names cylinder 1 as the one whose mixture departs from the others. Not every system can do that: CARB lets the stored code point only as far as the monitoring method allows, so many engines just log P219A or P219B. Those that resolve single cylinders include Toyota (the 2014 Corolla 2ZR gained P219C to P219F) and VW, whose 2014 2.5 litre five-cylinder leans each cylinder in turn and judges the resulting roughness, flagging a ratio below 0.19 or above 1.50. Subaru reflashed 2019 to 2020 Crosstrek Hybrid ECMs because P219C to P219F set without a real fault. Where the fault is real, check the cylinder 1 injector, its intake port seal and valve tightness with a leak-down test, as Toyota prescribes for the 2015 Tacoma V6. Cylinder numbering differs between makers, so confirm which cylinder is number 1.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 9C

Possible causes

  • Cylinder 1 injector clogged, leaking or out of tolerance high
  • Valve leakage on cylinder 1 (leak-down test) medium
  • Intake runner or injector seal leak at cylinder 1 medium
  • False detection fixed by ECM reprogramming (e.g. Subaru Crosstrek Hybrid) low

Symptoms

  • Check engine light on
  • Often no noticeable symptom
  • Possible P0301 or rough idle if cylinder 1 deviates strongly

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P219C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication