OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P219B

Bank 2 Air-Fuel Ratio Imbalance

P219B is the bank 2 counterpart for V and boxer engines. Ford's 2012 summary shows one way to find it: the ECM watches the fast ripple of the bank's wide-band sensor over windows of roughly 50 revolutions and sets the code when more than 75 % of them fail, after 300 to 700 s of driving at 1000 to 3000 rpm and 20 to 60 % load. On one GM 2016 engine the bank 2 limit is 1.15 against 1.05 for bank 1. Bulletins name leaking direct injectors (Ford F-150 2.7 EcoBoost 2018; Explorer and Aviator 3.0 EcoBoost 2023 to 2025, injectors of the affected bank replaced), faulty or contaminated injectors (Honda Pilot 2016), electrical noise in the A/F sensor lines (Mazda CX-9 2011 to 2013) and, at Infiniti on the QX80, a warning not to swap the A/F sensor first. A code on bank 2 only points to a part on that side.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 9B

Possible causes

  • Leaking or contaminated injector on bank 2 high
  • Interference or damage in the bank 2 A/F sensor wiring medium
  • Intake runner or gasket leak at one bank 2 cylinder medium
  • PCM calibration addressed by a software update low

Symptoms

  • Check engine light on
  • Usually no driveability change
  • Possible misfire codes on bank 2 cylinders

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P219B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication