OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2197

O2 Sensor Signal Biased/Stuck Lean (Bank 2, Sensor 1)

P2197 is the bank 2 version of P2195 on engines with a front sensor per bank: the bank 2 front oxygen or A/F sensor keeps reporting lean in a way the ECM rejects. GM's Bosch-based 2005 2.8 and 3.6 V6 flag it when the bank 2 rear sensor reads rich (above 0.85 V) while the front sensor reads leaner than lambda 1.08 with short-term trim at its 1.25 maximum, a contradiction a real lean mixture would not produce. Ford applies its switching, trim-limit and, from 2019, stuck-lambda tests to bank 2 the same way, with a 30 s window. Ford's 2017 bulletin for 2015 to 2017 Explorer and 2015 to 2016 F-150 3.5 GTDI lists P2195 and P2197 with P2626 and P2629, the pumping-current trim circuits of the A/F sensors, and fixes them with new heated oxygen sensors. If only bank 2 is affected, an exhaust manifold leak on that side ahead of the sensor is worth ruling out before replacing the sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 97

Possible causes

  • Bank 2 front oxygen or A/F sensor aged or contaminated high
  • Exhaust manifold leak on bank 2 ahead of the sensor medium

Symptoms

  • Malfunction indicator lamp on
  • Possible rough running or higher consumption

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2197

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication