P2186
Engine Coolant Temperature Sensor 2 Circuit Intermittent/Erratic
P2186 covers a sensor 2 signal that jumps instead of changing smoothly. Coolant temperature moves slowly because of the mass of the liquid, so a step faster than physics allows points to a loose contact rather than a real change. GM's 2019 tables (19OBDG03D) work out an upper and lower limit for each new reading from the previous value and the sensor's time constant, about 7.4 s for sensor 2 within a -60 to 150 °C window; a reading outside this corridor for 5 s within 6 s sets the code as Type B, MIL after two trips. GM also lists P2186 among the effects of the chafed engine harness in bulletin 21-NA-149. Typical causes are worn connector pins, a wire broken inside the insulation or a sensor with an intermittent element. Steady low or high signals are P2184 and P2185.
Possible causes
- Worn or loose pins in the sensor 2 connector high
- Wire broken inside its insulation or chafed harness making intermittent contact medium
- Sensor 2 with an intermittent internal fault low
Symptoms
- Check engine light after two drives
- Fans switching on and off irregularly
- Temperature-related messages that appear and vanish
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2186
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.