OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P217E

Fuel Injector Group H Supply Voltage Circuit Low

P217E flags the supply of injector group H as grounded, on GM's direct-injection V8 engines the injector of cylinder 8. GM lists it for the 6.2 LT4 in 2018 and in its 2016 table 16OBDG07A. With the high-side driver switched on, a current of 25 A or more means the line has found a path to ground; at 11 V or more, 10 bad samples out of 20 taken at 100 ms set the code as type A and light the MIL right away. Since the per-cylinder low-side codes P0282 and P0283 cover the return line, this code points specifically at the feed wire, the injector body or the driver. A practical check is to unplug the module and the injector and measure the feed wire to ground before suspecting the module. The engine loses cylinder 8. P217F is the high fault.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 7E

Possible causes

  • Cylinder 8 feed wire chafed to ground high
  • Cylinder 8 injector shorted to its housing medium
  • Engine control module output stage faulty low

Symptoms

  • Check engine lamp on immediately
  • Cylinder 8 misfire, engine shakes

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P217E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication