OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P217C

Fuel Injector Group G Supply Voltage Circuit High

P217C means the group G injector supply, cylinder 7 on GM's direct-injection V8 engines, is pulled up to supply voltage. GM tests this while the high-side driver is off: if the line sits within 1 V of the controller supply, the module treats it as shorted to power. The tables 16OBDG07A (2016), 18OBDG03A for the 6.2 LT4 and 19OBDG03A apply the same counting of 10 failures out of 20 samples, 100 ms apart, at 11 V or more, and treat it as type A with immediate MIL. A wire rubbed against a powered circuit, a damaged injector connector and, more rarely, a faulty driver inside the module are the usual causes; a module fault often shows as several high codes at once. To protect the injector from staying open, cylinder 7 is shut off. P217B is the low counterpart, P217A the general code.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 7C

Possible causes

  • Cylinder 7 feed shorted to a powered wire high
  • Damaged or wet injector connector medium
  • Engine control module driver fault low

Symptoms

  • Check engine lamp on immediately
  • Cylinder 7 misfire

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P217C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication