P217A
Fuel Injector Group G Supply Voltage Circuit/Open
Group G only exists on engines with seven or more injector groups, in practice eight-cylinder engines with direct injection. GM's 2023 and 2024 summary tables (23OBDG07, 24OBDG07) name the cylinder 7 injector G and use P217A for a short on its high side: less than 0.5 ohm between the module pin and ground while the driver is off, or to the injector supply while it is on. Two such events with more than 9 V on the battery store the code within one trip. As with groups E and F, GM keeps open circuits on the separate per-cylinder injector codes, so the title's open wording is misleading on these engines. No bulletin naming this code was found. The injector is switched off, cylinder 7 misfires and the engine runs noticeably rough. P217B and P217C are the dedicated low and high codes.
Possible causes
- Cylinder 7 injector feed shorted to ground or supply in the harness high
- Cylinder 7 injector shorted internally medium
- Engine control module driver faulty low
Symptoms
- Check engine lamp on, cylinder 7 misfire
- Rough running under load
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P217A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.