OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2176

Throttle Actuator A Control System - Idle Position Not Learned

P2176 says the closed rest position of throttle A could not be learned. At key-on or after shutdown the controller drives the plate onto its lower stop and stores the sensor values; if they stay outside the window after the permitted attempts, the code is set. GM's 2023 table 23OBDG07 aborts the learn when the plate misses the closed target by over 1.5 % or sensor 1 lies outside 0.33-0.58 V (sensor 2: 4.42-4.67 V), within one trip; GM's hybrid tables rate it Type A. Honda bulletin 13-042 cures false P2176 on 2013 Accord, Civic and Crosstour with software, GM PIP4573B blames frozen crankcase ventilation below -23 °C, and PIP4578B carbon. A Delphi patent describes repeated learn attempts. P218A is the throttle B code.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 76

Possible causes

  • Carbon on plate and bore preventing a clean closed position high
  • Ice from a frozen crankcase ventilation holding the plate open medium
  • Engine software misjudging the sensor signals (update available) medium
  • Idle learn not performed after cleaning or module replacement medium

Symptoms

  • Check engine lamp right after start
  • High, surging or unstable idle
  • Reduced engine power after a cold start

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2176

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication