P2170
Exhaust Pressure Regulator Vent Solenoid Control Circuit Low
P2170 reports the control line of the exhaust pressure regulator vent solenoid pulled toward ground. Jaguar Land Rover uses it for the solenoid of the active exhaust valve; its March 2018 shop foreman call lists P2170-11, meaning the line is grounded, on 2018 Discovery Sport and Evoque with active exhaust. On 2018 and 2019 Evoque, Discovery Sport and E-Pace with the 2.0 Ingenium petrol, MIL and sometimes a restricted performance message appear. JLR suspected high resistance while the valve is switched and asks for a circuit check, a check that the flap moves freely by hand and that the heat shield sits centred on the valve; a cold-soak test in a freezer can reproduce a sticking valve. New PCM software cured unexpected valve operation (JLRTB02020NAS2) and drops the power limitation.
Possible causes
- PCM software with an overly sensitive fault strategy, fixed by an update high
- Exhaust flap stiff, often from a misaligned heat shield or cold weather medium
- Control wire chafed through to ground near the exhaust medium
Symptoms
- Check engine lamp on
- Restricted performance message on some models
- Exhaust valve heard clicking at start-up
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2170
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.