OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P216E

Fuel Injector Group F Supply Voltage Circuit Low

P216E marks the feed of injector group F, the cylinder 6 injector on GM petrol direct injection, as shorted toward ground. It therefore concerns GM V6 and V8 engines with direct injection. The 2016 3.6 LGX and the 2018 LT4 tables use a current test: with the driver on, 25 A or more through the high side counts as a short, and 10 failures in 20 samples taken every 100 ms at 11 V or more store a type A code with the MIL on the first trip. GM's PI0631H for the 2012 and 2013 Impala includes P216E among the circuits that a harness rubbing on the transmission can damage; GM adds that usually only one circuit is hit. Diagnosis compares the resistance from the injector 6 feed pin to ground with the module unplugged. P216F is the high fault.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 6E

Possible causes

  • Cylinder 6 feed wire chafed through to ground high
  • Cylinder 6 injector shorted to ground medium
  • Engine control module output stage faulty low

Symptoms

  • Check engine lamp on immediately
  • Cylinder 6 misfire and loss of power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P216E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication