OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P216D

Fuel Injector Group F Supply Voltage Circuit/Open

P216D is the general fault of injector group F, which GM petrol direct injection equates with cylinder 6; its 2024 tables (24OBDG07) call it injector F. GM uses this code for shorts on the high side rather than opens: the 2008 3.6 LLT sets it for cylinder 6 shorted to ground or battery, while an open on either side goes to P0206; the 2024 tables count two events of less than 0.5 ohm to ground or supply, above 9 V, one trip. Two bulletins name it. PIP4924D covers 3.0 and 3.6 V6 models such as Enclave, Traverse, CTS and Camaro with chafed injector harnesses. Bulletin 24-NA-106 for the 2023 and 2024 Corvette with the LT6 lists P216D as cylinder 6 alongside P2149, P2155 and P217D, all bank 2, caused by water in a wrong 12-way connector.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 6D

Possible causes

  • Injector harness rubbed through on V6 engines high
  • Water in the bank 2 injector harness connector (Corvette LT6) medium
  • Cylinder 6 injector shorted low

Symptoms

  • Check engine lamp on, cylinder 6 misfire
  • With the LT6 several bank 2 codes and fuel pressure faults at once

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P216D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication