OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P216A

Fuel Injector Group E Supply Voltage Circuit/Open

Injector group E exists only on engines with at least five cylinders or five separately fed injector groups. GM petrol direct injection uses one group per cylinder, and its 2024 tables (24OBDG07) state it plainly: injector E is cylinder 5. The code covers the high-side feed of that injector. Despite the word open in the title, GM uses it for shorts: the 2008 3.6 LLT sets P216A for the high side of cylinder 5 shorted to ground or battery and leaves open circuits to P0205; the 2024 tables flag less than 0.5 ohm to ground with the driver off or to supply with it on, after two events above 9 V, one trip. GM bulletin PIP4924D lists P216A on 3.0 and 3.6 V6 engines whose injector harness rubbed through against the plenum, valve cover bolts or fuel line. Cylinder 5 misfires.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 6A

Possible causes

  • Injector harness rubbed through at the intake plenum, valve cover bolts or fuel line high
  • Cylinder 5 injector shorted internally medium
  • High-side driver in the engine control module faulty low

Symptoms

  • Check engine lamp on, often with a cylinder 5 misfire code
  • Rough running and reduced power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P216A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication