OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2168

Throttle/Pedal Position Sensor F Maximum Stop Performance

P2168 covers position signal F at maximum travel. Letter F only exists where the pedal carries a third sensor track; GM's 2004 engine table, for example, runs a third pedal sensor under the F circuit codes, whereas most current cars make do with two tracks. The code sets when F, with the pedal at its upper stop, reports a value outside the accepted range. No manufacturer documents P2168 publicly; its logic follows P2163, which Ford lists, and the open-stop learning in a Visteon patent. Before ordering a pedal module, confirm that the car has a sensor F and compare all three tracks at full pedal. A worn track, a poor connector contact or a pedal that cannot reach its stop are typical. P2117 tests the rest position of F, P2130-P2133 its circuit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 68

Possible causes

  • Third pedal track F worn at full travel medium
  • Poor contact on the sensor F pins medium
  • Pedal held short of its stop medium

Symptoms

  • Engine warning lamp on
  • Full power not available

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2168

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication