OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2167

Throttle/Pedal Position Sensor E Maximum Stop Performance

P2167 checks position signal E at maximum travel; on designs that call the pedal tracks D, E and F, E is the second pedal sensor. The code sets when E, with the pedal fully down, reports a value outside the accepted band. Because the second track usually has a different characteristic from the first, checking D and E side by side at full pedal reveals whether only E is off or the pedal itself is blocked. No manufacturer documents P2167 publicly; the logic mirrors P2163, which Ford lists, and the open-stop learning in a Visteon patent. Wear near the far end of the E track, contact corrosion in the pedal connector or an obstructed pedal are likely causes. P2116 covers the rest position of E, P2125-P2129 its circuit, P2138 the D/E check.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 67

Possible causes

  • Pedal sensor track E worn at the full-travel end high
  • Contact corrosion in the pedal connector medium
  • Pedal cannot reach its stop (mat, object, bent bracket) medium

Symptoms

  • Engine warning lamp on
  • Limited power with the pedal fully pressed
  • Possible limp mode

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2167

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication