OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2166

Throttle/Pedal Position Sensor D Maximum Stop Performance

P2166 refers to position signal D, which on Ford designs is the first track of the accelerator pedal. The code means the reading with the pedal pressed all the way does not match the calibrated maximum, for instance because the pedal never reaches its stop or the track is worn at the far end. No manufacturer documents P2166 publicly; it applies the logic of the A version P2163 and of the open-stop learning in a Visteon patent to the pedal. A thick floor mat, a bent pedal arm or a worn pedal module are typical causes. The engine computer may then cap the torque request, so the car feels as if it never reaches full power. P2115 covers the rest position of D, P2120-P2124 its circuit, and P2138 the D/E correlation.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 66

Possible causes

  • Floor mat or object keeps the pedal from its stop high
  • Pedal sensor track D worn at full travel medium
  • Bent pedal arm or damaged pedal bracket low
  • Corroded pedal connector shifting signal D low

Symptoms

  • Engine warning lamp on
  • No kickdown or no full power with the pedal floored
  • Possible limp mode

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2166

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication