OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2165

Throttle/Pedal Position Sensor C Maximum Stop Performance

P2165 belongs to the rarely used letter C. It is set when position signal C, at the upper stop of its throttle or pedal, reports a value the controller cannot accept as full travel. Since Ford gives A and B to the throttle and D to F to the pedal, C only appears on layouts with a third sensor track or a different naming scheme. No manufacturer documents P2165 publicly; the description follows the A version P2163, which Ford lists, and a Visteon patent on learning the throttle's open stop. Before replacing parts, confirm that the vehicle really uses a sensor C; an aftermarket throttle body or pedal with a different characteristic can also produce the code. P2114 tests the closed stop of C, P2136/P2137 compare C with A or B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 65

Possible causes

  • Sensor C track worn at the end of travel medium
  • Replacement throttle or pedal with a different characteristic medium
  • Mechanical obstruction before the upper stop medium
  • Resistance in the sensor C wiring or connector low

Symptoms

  • Engine warning lamp on
  • Reduced power at full load

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2165

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication