P2164
Throttle/Pedal Position Sensor B Maximum Stop Performance
P2164 is the full-travel test for position signal B. When the throttle or pedal is held at its upper stop, sensor B has to report a value inside a calibrated band; a reading or learned maximum outside that band sets the code. Ford and GM call their second throttle body sensor B, so on those designs the code points at the throttle body, yet no manufacturer documents P2164 publicly. The nearest evidence is Ford's listing of the A version P2163 and a Visteon patent that learns the open stop and rejects values beyond about 80 to 110 degrees. On many throttle bodies the second track runs opposite to the first, so comparing A and B at full opening helps to tell a sensor fault from a mechanical block. P2113 checks the closed stop of B; P0220-P0223 cover its circuit.
Possible causes
- Sensor B track worn or drifted at the full-open end high
- Deposits or a damaged stop limit the plate travel medium
- Corroded contact on the sensor B signal or reference pin medium
- End positions not relearned after part replacement low
Symptoms
- Engine warning lamp on
- Power limited at high throttle demand
- Occasional limp mode
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2164
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.