P2163
Throttle/Pedal Position Sensor A Maximum Stop Performance
P2163 concerns position signal A at the upper end of its travel: with the throttle or pedal resting on its maximum mechanical stop, the reading or the learned full-open value lies outside the band the calibration accepts. On Ford layouts A is the first throttle body sensor, while D to F belong to the pedal. Ford lists P2163 for the 2014 Boss 302S with MIL and wrench lamp. A Visteon patent shows the idea: the motor presses the plate onto its fully open stop for about 60 ms, the sensor value is stored, and a learned stop outside roughly 80 to 110 degrees is reported as a failure. Carbon, a bent stop or a worn sensor track are typical causes. P2109 is the matching closed-stop check; P2164-P2168 test the other letters. Reduced power is possible.
Possible causes
- Carbon or a bent stop keeps the plate from reaching full opening high
- Sensor A track worn at the full-open end medium
- Replacement throttle body not matching or not relearned medium
- Contact resistance in the sensor connector shifting the signal low
Symptoms
- Check engine and throttle warning lamps on
- Engine does not reach full power
- Limp mode with limited throttle opening
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2163
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.