P2162
Vehicle Speed Sensor A/B Correlation
P2162 means two speed sources, A and B, disagree by more than the calibration permits although each circuit is electrically sound. Depending on the vehicle, A and B can be a transmission output sensor, a transfer case sensor or wheel sensors read through the ABS unit. No manufacturer documents P2162 publicly. GM shows how closely the sources are linked: when its transfer case sensor fails (P2160/P2161), the software substitutes driven-wheel speed multiplied by the axle ratio (18OBDG04). California's OBD rule names the vehicle speed sensor among inputs that must be checked for plausibility. Wrong tyre size or axle ratio, a damaged tone wheel or debris on one sensor are typical causes. Speedometer, shifting, cruise control and 4WD may suffer.
Possible causes
- Tyre size or axle ratio differs from the programmed values high
- Metal debris or damage on one of the two sensors medium
- Damaged or wrong tone wheel on one shaft or hub medium
- Wheel speed signal from the ABS unit faulty low
Symptoms
- Check engine lamp
- Speedometer reading wrong or unsteady
- Harsh or mistimed shifts, possibly a fixed-gear fallback
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2162
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.