P2161
Vehicle Speed Sensor B Circuit Intermittent/Erratic/High
P2161 flags a speed signal B that behaves in ways no real vehicle can: it collapses for a moment, jumps or reads implausibly high. GM documents the code for the transfer case output speed sensor (18OBDG04). While the truck is driven in gear without braking, a drop of the sensor speed larger than a delta threshold starts a 3-second fail timer, and five such counts store the code as Type B. GM adds that one dropout can also start the P2160 timer, so whichever runs out first is recorded. Loose connector contacts, chafed wires, metal debris on the sensor tip or a cracked tone wheel are the typical culprits. P2160 means the signal is missing altogether; P2162 compares sensor B with sensor A.
Possible causes
- Connector contact opening briefly under vibration high
- Signal wire chafed against the transfer case or frame medium
- Metal debris on the magnetic sensor tip medium
- Chipped or cracked tone wheel low
Symptoms
- Check engine lamp, often only on rough roads
- Speedometer needle twitching
- Sporadic four-wheel-drive or shift complaints
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2161
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.