OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P215F

Reductant Heater D Current Too High

P215F is set when heater D of the DEF system pulls more current than its design allows, which points to a partly shorted element or a leak path to ground in its wiring. The letter D is assigned by each maker, and many systems have only three heaters. No maker documents P215F publicly. As a guide, GM's 2025 Duramax tables trip the high-current codes of heaters A to C above 15 A in 40 samples of 0.1 s and treat them as Type A, and Ford's 2023 diesel summary detects an overloaded tank or line heater within 2.2 s. The controller usually switches the faulty element off to protect its driver, so the fluid in that area is no longer heated. Wet connectors, chafed leads and internal shorts are typical. The low-current partner is P215E; circuit faults are P20C5 to P20C8.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 5F

Possible causes

  • Heating element D partly shorted internally high
  • Moisture or DEF crystals in the heater D connector bridging pins medium
  • Chafed heater lead touching ground or a neighbouring circuit medium

Symptoms

  • Check engine light with a DEF or emission system warning
  • DEF stays frozen in the affected area during cold weather
  • Blown heater fuse in some cases

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P215F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication