OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P215D

Reductant Pump B Stuck On

P215D says the second DEF pump, called pump B or pump 2, keeps running or stays powered although the controller has commanded it off. No manufacturer documents this code publicly. Pump B itself is documented: Ford's 6.7L Super Duty trucks of 2023 can store pump B circuit codes P20FA, P20FC and P20FD (SSM 51891), and FCA names the same channel Reductant Pump 2 on 3.0L EcoDiesel models. California's OBD rule asks for functional checks of output components, and a stuck-on state is the logical opposite of P20FB, Performance/Stuck Off. A driver stage that no longer switches off, a control line shorted on the switched side or a welded relay could cause it. Effects can include pressure that cannot be released, lines not purged at shutdown and a drained battery. P201F is the same fault on pump A.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 5D

Possible causes

  • Output stage in the control module no longer switching off high
  • Pump control line shorted so the pump receives power permanently medium
  • Welded contacts in the pump supply relay low

Symptoms

  • Check engine light on
  • Pump audible after switching off the engine
  • DEF system warning, possibly a flat battery after standing

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P215D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication