P2154
Fuel Injector Group C Supply Voltage Circuit High
P2154 is the high fault of injector supply group C. On GM's 2018 Duramax V8 it covers injectors 6 and 7: with the driver off, 0.5 Ω or less from a high-side pin to supply potential in 5 of 10 samples sets it, type A, one trip. Ford's 2023 diesels assign it to an internal error flagged by the module's high-voltage injector driver chip, a strong hint that the control unit itself is at fault. For GM petrol direct injection it means excess voltage on the high-side control line of cylinder 3, and GM PIP6034 lists it with P2148, P2151 and P2157 on 2024–25 2.5 L LK0 crossovers, where an internal PCM hardware fault requires replacing the module. Group C exists only where an engine has a third bank or cylinder. The low and open faults are P2153 and P2152.
Possible causes
- Internal hardware fault of the injector driver in the module high
- Group C supply wire shorted to battery voltage medium
- Injector of group C with internal short low
Symptoms
- Check engine lamp on
- Misfire on the group C cylinders
- Rough running at idle
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2154
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.