OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2149

Fuel Injector Group B Supply Voltage Circuit/Open

P2149 is the open or general fault of the second shared injector supply. Group membership depends on the engine: GM's 2009 Duramax places injectors 7 and 6 in group 2 (6 ms, type A), whereas GM's 2018 tables pair injectors 2 and 5 in the V8 – so the cylinders must be looked up for each engine. VW's 2014 TSI and VR6 engines use the same current window as for group A, under 2.6 A or above about 14.7–14.9 A. GM petrol direct injection treats P2149 as the high-side control line of cylinder 2: on the 2023–24 Corvette LT6 bulletin 24-NA-106 traces it, with rail pressure codes, to water entering a wrong 12-way connector on bank 2. A Mercedes M254 bulletin lists P2149 among faults caused by fuel boiling in the low-pressure system.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 49

Possible causes

  • Injector harness damaged or wire open high
  • Water entering an injector harness connector medium
  • Open coil or piezo stack in an injector of the group medium
  • Low rail pressure from fuel vapour triggering follow-up faults low

Symptoms

  • Misfire on the cylinders of group B
  • Rough running and reduced power
  • Check engine lamp on

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2149

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication