OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2146

Fuel Injector Group A Supply Voltage Circuit/Open

Direct-injection and common-rail injectors are fed by a high-side driver in the engine module, often shared by several injectors. P2146 is the open or general fault of the first such supply. GM's 2009 Duramax diesel pairs injectors 1 and 4 in group 1 and sets P2146 when the driver sees an open, short or missing load for 6 ms, type A. VW's 2014 TSI and VR6 engines check the high-side current: below 2.6 A or above 14.9 A. GM petrol direct injection assigns the code to a single cylinder, the high-side control line of cylinder 1; in the Saab 9-5 2.0T a supply fault shared by cylinders 1 and 4 sets P2146 and P2155 together, after 1 s, type B, and the injector is shut off. GM bulletin PIP4924D links it to chafed V6 injector harnesses. Expect misfire and rough running.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 46

Possible causes

  • Injector harness chafed through or wire open inside insulation high
  • Loose, wet or corroded injector connector medium
  • Open coil or piezo stack in an injector of the group medium
  • Faulty high-side driver in the engine control module low

Symptoms

  • Misfire on one or more cylinders
  • Rough running and loss of power
  • Check engine lamp on

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2146

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication