OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2143

EGR Vent Control Circuit/Open

Vacuum-operated EGR valves are often run by a pair of solenoids: one feeds vacuum to the valve diaphragm to open it, the other – the vent solenoid – lets air in to release the vacuum and close the valve. Ford's EEC engine computers had separate outputs for EGR vent and EGR control, and a Kia diesel patent maps both solenoids by duty cycle, using the vent side whenever the measured EGR value is above target. P2143 means the module found the vent solenoid circuit open or otherwise faulty. Without a working vent the valve may close slowly or stay open longer than wanted, causing rough idle; many systems simply disable EGR. No manufacturer publishes thresholds for P2143. Shorts are reported separately as P2144 and P2145.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 43

Possible causes

  • Loose connector or broken wire at the vent solenoid high
  • Open coil in the vent solenoid medium
  • Blown fuse or missing supply voltage to the solenoid low
  • Faulty output stage in the engine control module low

Symptoms

  • Check engine lamp on
  • Rough idle or stalling after deceleration
  • EGR readiness not completed

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2143

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication