P2140
Throttle/Pedal Position Sensor/Switch E/F Voltage Correlation
P2140 checks the second and third pedal tracks, E and F, against each other. As with P2139, no manufacturer explains its own trigger for this code, and FCA's emissions recall T21 for the 2004-2006 Dodge Sprinter just includes it in the list of codes that may follow the ECU reflash. GM's 2004-2005 trucks show what the comparison looks like in practice: their P2126 sets when sensor 2 differs from sensor 1 by more than 0.20 V and from the rescaled sensor 3 by more than 0.26 V, so the E-to-F term is part of a vote rather than a code of its own. Because track E is often scaled differently from F, a fault on a shared reference can shift one signal more than the other. Warning lamp and reduced pedal response follow.
Possible causes
- Track E or F of the pedal sensor worn or drifted high
- Shared 5 V reference or ground fault shifting one track medium
- Contact resistance or moisture at the pedal connector medium
Symptoms
- Engine or wrench warning lamp on
- Reduced or delayed pedal response
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2140
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.