OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P213F

Fuel Pump System Fault - Forced Engine Shutdown

P213F is the supply-side twin of P213E: the engine module shut the engine down because the fuel pump system – electric lift pump, its relay or control module, or the engine-driven high-pressure pump – no longer behaves in a way it can accept. No manufacturer documents P213F publicly, so the trigger is not known in detail. How closely pumps are watched can be seen in Ford's 2023 diesel summary: the lift pump relay circuits are checked for open and shorts within 0.2 s, and the duty-cycle feedback of the pump must stay between 78 and 82 %. A deliberate shutdown goes further than those circuit codes and is normally stored together with them. Injection-side faults are logged as P213E instead. The engine stops or will not restart; towing is usually needed.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number1 / 3F

Possible causes

  • Electric lift pump or its control module failed high
  • Pump relay, fuse or wiring fault medium
  • Worn or seized high-pressure pump medium
  • Clogged filter or empty tank starving the pump low

Symptoms

  • Engine shuts off while driving
  • No restart or very long cranking
  • Check engine lamp with fuel pump codes

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P213F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication